It all started with Alex, a tech aficionado who couldn’t resist tinkering with his gadgets. The shiny Galaxy FIP 3, with its sleek design and cutting-edge features, sat on his desk like an unopened treasure chest. But there was a catch: Alex felt limited by the device’s default settings. He wanted freedom—to install custom apps, modify settings, and truly own his device. That’s when he stumbled upon the idea of rooting the Galaxy FIP 3.
Rooting, a term both thrilling and intimidating, promised Alex a world of possibilities. If you’re like Alex, itching to explore the full potential of your device, this guide is your golden ticket.
What is Samsung Root Galaxy Fip 3?
Demystifying Root Access
Samsung Root Galaxy Fip 3 refers to the process of gaining superuser access to your Android device. In simple terms, it’s like unlocking the VIP section of a concert—you get access to features and controls that regular users can only dream about.
With the Galaxy FIP 3, rooting can:
- Unlock hidden features and customizations.
- Allow installation of third-party apps.
- Boost performance through overclocking.
- Enable de-bloating, freeing up space by removing pre-installed apps.
How to Root Samsung Galaxy Z Flip 3
Rooting a Samsung phone has become more challenging than ever, with small errors potentially bricking your device. Fortunately, tools like Samsung’s flash tool can assist in navigating these complexities. Rooting is worth the effort for enthusiasts, as it unlocks advanced customizations and features unavailable by default. However, since rooting requires an unlocked bootloader, let’s first explore how to unlock the bootloader on the Samsung Galaxy Z Flip 3.
Unlocking the Bootloader on Samsung Galaxy Z Flip 3
The bootloader is a crucial security mechanism on Android devices but also limits your ability to modify your phone, such as rooting or installing custom ROMs. To proceed with rooting, you must first unlock the bootloader. Samsung has specific steps for this, but keep in mind the following:
- Caution: Some Galaxy models (e.g., Galaxy Z Fold 3) may experience restricted features like camera functionality after unlocking the bootloader. Fortunately, no such issue has been reported for the Galaxy Z Flip 3.
- Processor Restriction: Galaxy phones with Snapdragon processors often don’t support bootloader unlocking in certain regions. Confirm compatibility before proceeding.
Steps to Unlock the Bootloader on Galaxy Z Flip 3
- Backup Your Data
Unlocking the bootloader will erase all data on your device. Create a full backup of your Galaxy Z Flip 3 to prevent data loss. - Enable Developer Options
- Open Settings > About Phone > Software Information.
- Find the Build Number and tap it 7–8 times until you see the message: You are now a developer.
- Enable OEM Unlocking
- Go back to Settings > Developer Options.
- Toggle on OEM Unlocking and USB Debugging for additional preparation.
- Boot into Download Mode
- Power off your device.
- Press and hold Volume Up + Volume Down, then connect your phone to your PC via USB.
- Release the buttons when a warning screen appears.
- Unlock the Bootloader
- On the warning screen, press and hold the Volume Up button to access the bootloader menu.
- Press Volume Up again to confirm the bootloader unlock.
- The bootloader will unlock, wiping all data.
- Reboot and Verify
- Restart your phone and check the unlock status in Developer Options or Download Mode.
Next Steps: Rooting Your Galaxy Z Flip 3
After successfully unlocking the bootloader, you’re ready to root your device. Make sure to carefully follow the prerequisites and root-specific instructions for your Galaxy Z Flip 3 to avoid complications. Rooting offers endless possibilities for customization and optimization, but it also requires a cautious approach.
Prerequisites for Rooting Galaxy Z Flip 3
Before you begin rooting your Galaxy Z Flip 3, ensure the following:
- Backup Your Data: Create a full backup of your phone to prevent data loss.
- Download Magisk APK: Install the latest version of the Magisk app.
- Download Odin Flash Tool: This tool will be used to flash patched files.
- Unlock the Bootloader: Confirm that the bootloader is unlocked on your device.
- Download Firmware: Get the same firmware version as your phone using tools like Samsung Downloader or Frija.
- Install ADB & Fastboot Drivers: Ensure these drivers are set up on your PC for seamless communication between devices.
Steps to Root Galaxy Z Flip 3 Using Magisk
- Extract Firmware and Prepare Boot Image
- Extract the downloaded firmware on your PC and locate the AP file (file starting with
AP). - Inside the AP file, extract the boot.img.lz4 and convert it into a
.tarfile using 7-Zip or a similar tool.
- Extract the downloaded firmware on your PC and locate the AP file (file starting with
- Copy Boot Tar File to Phone
- Transfer the boot tar file to your Galaxy Z Flip 3.
- Install Magisk App
- Download and install the Magisk app on your phone. If it’s already installed, proceed to the next step.
- Patch the Boot Image
- Open the Magisk app and tap Install.
- Choose Select and Patch a File from the pop-up menu.
- Navigate to the boot tar file and select it. Wait for the app to patch the file.
- The patched file will be saved as
magisk_patched.tarin the Downloads folder.
- Transfer Patched File to PC and Enter Download Mode
- Move the
magisk_patched.tarfile back to your PC. - Boot your phone into Download Mode: Power off the phone, then press and hold Volume Up + Volume Down while connecting the device to your PC.
- Move the
- Flash Patched File Using Odin
- Launch the Odin Flash Tool on your PC.
- Load the
magisk_patched.tarfile into the AP slot of the Odin interface. - Navigate to the Options tab and uncheck Auto Reboot.
- Click Start to begin flashing the patched file.
- Reboot and Perform a Factory Reset (if necessary)
- After flashing, Odin will display a Pass message, and your phone will reboot.
- If the phone gets stuck in a bootloop, perform a factory reset.
- Finalize Magisk Setup
- Turn on your phone’s internet connection.
- Install or open the Magisk app. Follow any on-screen instructions to complete the setup.
Enjoy Root Access on Galaxy Z Flip 3
Congratulations! Your Samsung Galaxy Z Flip 3 is now rooted. With root access, you can:
- Install apps that require elevated permissions.
- Enjoy advanced customizations through Xposed Modules and Magisk Modules.
If you’re interested, you can also explore how to install the Xposed Framework on Android 11 for even more customization options.
Frequently Asked Questions
What is the process to unlock the bootloader on the Samsung Galaxy Z Flip 3?
To unlock the bootloader on your Galaxy Z Flip 3, go to Settings > About Phone > Software Information, tap the Build Number multiple times to enable developer options, then navigate to Settings > Developer Options and enable OEM Unlocking and USB Debugging. After that, power off the phone, connect it to your PC, and boot into Download Mode. From here, you can unlock the bootloader by pressing the appropriate buttons in Download Mode.
Can I root my Samsung Galaxy Z Flip 3 without unlocking the bootloader?
No, unlocking the bootloader is a mandatory step before rooting your Galaxy Z Flip 3. Rooting requires access to the system partition, which is restricted by the bootloader’s security settings. Unlocking it removes these restrictions and allows for root access.
Does unlocking the bootloader void my warranty or affect the phone’s functionality?
Yes, unlocking the bootloader will void your warranty, as it bypasses Samsung’s built-in security features. Additionally, unlocking the bootloader can disable certain functions, such as the camera in some devices. However, no significant issues have been reported with the Galaxy Z Flip 3 regarding this, so it’s important to proceed with caution and understand the risks.
How do I root my Samsung Galaxy Z Flip 3 after unlocking the bootloader?
To root your Galaxy Z Flip 3, you’ll need to extract the firmware, patch the boot image using Magisk, and then flash the patched file using Odin. After completing the steps, you’ll gain root access, allowing you to install root-dependent apps and use advanced features like custom ROMs and Xposed Modules.
What should I do if my Galaxy Z Flip 3 gets stuck in a bootloop after rooting or unlocking the bootloader?
If your Galaxy Z Flip 3 enters a bootloop after unlocking the bootloader or rooting, try performing a factory reset through recovery mode. If the problem persists, you can use Odin to reflash the stock firmware to restore your device to its original state. Always ensure you’ve followed the instructions carefully to avoid such issues.
Conclusion
Rooting your Samsung Galaxy Z Flip 3 and unlocking the bootloader can open up a world of customization options and advanced features that are otherwise unavailable. However, the process requires careful attention to detail, as mistakes can result in data loss or even bricking your device.
By following the steps to unlock the bootloader and root your device, you can gain root access and enjoy benefits such as enhanced performance, custom ROMs, and the ability to use root-dependent apps and modules. Make sure to back up your data, enable developer options, and use trusted tools like Magisk and Odin to ensure a smooth experience.
Remember, unlocking the bootloader will void your warranty and may disable some features, so weigh the pros and cons before proceeding. With proper preparation and caution, rooting your Galaxy Z Flip 3 can be a rewarding experience, allowing you to fully unlock its potential.
