DirecTV Remote to Samsung TV is not just a TV streaming service; it also offers a universal remote. Whether you’ve purchased a new universal remote or you’re using a DirecTV set-top box with a smart TV, did you know you can control both your DirecTV box and your smart TV with a single remote? Yes, that’s correct!
In this guide, we’ll show you how to program and use your DirecTV remote with a Samsung TV.
Why focus on Samsung TVs, you may wonder? Samsung is a popular brand, and many users likely have both a Samsung TV and a DirecTV box. If you’re one of those users, this guide is tailored for you.
There are several reasons you might want to program your DirecTV remote to work with your Samsung TV. Perhaps you’re tired of managing two remotes, or maybe your Samsung TV remote has been lost, damaged, or stopped working. Whatever the reason, keep reading for two different methods to get the job done.
How to Program DirecTV Genie Remote to Samsung TV [Automatic Setup]
If you have a Genie DirecTV remote and want to use it with your Samsung TV, follow these simple steps:
- Grab your Genie DirecTV remote and point it at the Genie HD DVR.
- Press and hold the Mute and Enter buttons on the Genie remote.
- Release the buttons when the green light blinks twice.
- Within a few seconds, your TV will display “Applying RF/IR Setup,” indicating the remote is in RF mode.
- Press the MENU button on the remote.
- Go to Settings > Remote Control > Program Remote.
- Choose the device you want to control with the Genie remote.
- Follow the on-screen instructions to complete the setup and use your remote to control your Samsung TV.
How to Program DirecTV Genie Remote to Samsung TV [Manual Setup]
If the automatic setup didn’t work, you can manually program your Genie remote. Here’s how:
- Point the Genie DirecTV remote at your Genie HD DVR.
- Press and hold the Mute and Enter buttons until the green light blinks twice.
- Enter the code 961 and press the Channel Up button twice.
- Press the Enter button, then select OK when the TV confirms the remote is set up for RF.
- With the TV turned on, press the MENU button on the remote.
- Navigate to Settings > Remote Control > Program Remote.
- Follow the on-screen instructions to control your Samsung TV with the Genie remote.
How to Program DirecTV Universal Remote to Samsung TV
You can also use the basic Universal Remote from DirecTV to control your Samsung TV. Follow these steps:
- Press the MENU button on the remote.
- Go to Settings > Remote Control > Program Remote.
- Select TV from the list, then choose your TV’s brand.
- Use DirecTV’s handy code lookup tool on their website to find the correct code for your Samsung TV.
- Enter the code using the Universal Remote.
- Follow the on-screen instructions to complete the setup.
This guide covers how to program and pair both the Genie and Universal DirecTV remotes to your Samsung TV. Using the Code Lookup Tool ensures you find the correct code for your specific Samsung TV model.
What to Do If the DirecTV Remote Won’t Program to Your Samsung TV
Okay, let’s address the elephant in the room. Sometimes things don’t go as planned. If your DirecTV remote refuses to pair with your Samsung TV, don’t panic. There are a few common troubleshooting steps you can take:
- Check the Code: Double-check the code you’ve entered. It’s easy to mistype it!
- Try a New Code: If the first code didn’t work, try a different one from the list. There are often multiple codes for each model.
- Ensure Line of Sight: Make sure there’s a clear path between the DirecTV remote and the Samsung TV. Obstructions can interfere with the infrared signal.
- Reset the Remote: If all else fails, try resetting your DirecTV remote. To do this, press and hold the Mute and Select buttons until the red light blinks twice, and then release. After that, try the steps again from the beginning.
Why Does Programming Your DirecTV Remote to Samsung TV Matter?
Imagine this: You’re deep into a Samsung TV marathon, your fingers are itching to change the volume, and you’re staring at the cluttered mess of multiple remotes. You press the wrong button and suddenly the volume controls switch to the DirecTV satellite box, and you end up turning up the satellite audio instead. Talk about frustrating!
By programming the DirecTV remote to your Samsung TV, you solve that problem once and for all. One remote controls both devices, reducing confusion and making your entertainment experience so much smoother.
Alternative Methods for Pairing Your DirecTV Remote to Samsung TV
If the traditional method doesn’t work for you, there are some alternative options to try. One common approach is auto-programming. Here’s how it works:
- Put the DirecTV remote into programming mode (same as the first method).
- Instead of entering a code, press and release the channel up button repeatedly. Keep pressing it until the TV turns off.
- Once it does, press Enter to store the code. This method can take a little longer, but it’s worth a shot if you’re having trouble with the manual code entry.
Frequently Asked Questions
Can I use my DirecTV remote to control both my Samsung TV and DirecTV box?
Yes, you can program your DirecTV remote to control both your Samsung TV and DirecTV box. This allows you to use just one remote for both devices.
How do I program my DirecTV remote to a Samsung TV automatically?
To automatically program your DirecTV remote to your Samsung TV, press and hold the Mute and Enter buttons on your Genie remote, follow the on-screen instructions, and choose your TV as the device to control.
What should I do if the automatic setup doesn’t work?
If the automatic setup fails, you can manually program your DirecTV remote by entering a code. For Samsung TVs, use the code 961 and follow the on-screen steps for manual programming.
How can I find the correct code to program my DirecTV remote to my Samsung TV?
You can use DirecTV’s code lookup tool available on their website. Simply search for your Samsung TV model, and it will provide you with the correct code to enter for programming.
Can I program a standard DirecTV remote (not Genie) to control my Samsung TV?
Yes, you can program a standard DirecTV Universal remote to control your Samsung TV. Follow the steps to enter the code for your TV model, and your remote will be ready to use.
conclusion
Programming your DirecTV remote to control your Samsung TV is a straightforward process that can be done either automatically or manually. By following the steps outlined, you can easily pair your DirecTV remote with your Samsung TV, allowing you to control both your TV and DirecTV box with a single remote. Whether you prefer the automatic setup or need to input the code manually, both methods are simple and effective. With the added convenience of DirecTV’s code lookup tool, you can ensure that your remote is configured correctly for your specific Samsung TV model. Enjoy the ease of controlling your devices with just one remote!
